Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2024-04-25 08:03
328
Company Profile
By certification [File Integrity]
Contact：yiguangzhiyao(Mr.)
Email：
Telephone：
Phone：
Area：Beijing
Address：Beijing
Website：http://www.machinepharmaceutical.com/ http://yiguangzhiyao.china-jinquan.com/
??
AGL-1 peristaltic pump filling machine is an improved version of the company's original ampoule drawing filling and sealing machine. The problem of dripping and inaccurate measurement. Especially suitable for laboratory operators who have no equipment experience.
??
??
The filling system adopts the form of PLC plus peristaltic pump, and the induction type has no bottle and no filling, and the control is sensitive;
The peristaltic pump adopts the stepping motor pulse form to solve the problems of leakage and lack of liquid;
The gas control valve uses a flow meter to replace the copper valve that is not easy to adjust;
??
??
Applicable specifications: 1-2ml
Output: 2400-3600 pieces/hour.
Motor: 220v 370w 50Hz
Gas selection: liquefied petroleum gas/coal gas/acetylene
Gas consumption: pipeline gas 0.5-0.7m?3/h (gas), 0.08-0.1Mpa (LPG)
Combustion aid and dosage: 0.4m?3/h, Oxygen 0.1Mpa
Dimensions: 1000*750*1000mm
Weight: 75-85kg
??
Product advantages
??
The peristaltic pump replaces the original glass plunger pump, realizing the one-button adjustable filling amount.
The whole machine is made of all-inclusive 304 stainless steel, reducing sanitary dead ends and facilitating cleaning.
Photoelectric sensing function without bottle and filling, precision filling and anti-drip function.
The gas source can be connected to coal gas, oxygen or hydrogen oxygen.
The filling needle and nitrogen injection needle are all made of 316L stainless steel, meeting pharmaceutical requirements.
Working principle
??
The machine adopts the cam gear structure. First, the dial wheel pushes the ampoule bottle into the bottle feed rack. The bottle feed rack moves from left to right, gradually delivering the ampoule bottle to the filling station and the sealing station. The copper clamp is used to cut off the waste head of the ampoule bottle to achieve the effect of sealing the ampoule bottle.
??
Precautions
??
Before starting the car, you must first use the crank handle to turn the machine, check if there is any abnormality in the rotation, and make sure that it is normal before starting the car. However, please note: before starting the car, you must first pull out the crank handle to disconnect the crank handle from the machine to ensure operation safety.
When adjusting the machine, the tools must be used appropriately. It is strictly forbidden to use too large tools or excessive force to disassemble parts to avoid damaging the goods and affecting the performance of the machine.
After each adjustment of the machine, the screws must be tightened. Use the crank handle to turn the machine to check if the movement meets the requirements before starting the car.
The flame head should be frequently judged by the size of the flame head to see if it is good, because the small hole of the flame head is easy to be blocked by carbon or the small hole is deformed after a certain period of use, which affects the vitality.
A vent pipe should be installed on the flame head of the filling machine, which can discharge heat and a small amount of dust in the gas, while maintaining the indoor temperature, humidity and cleanliness, which is beneficial to product quality and the health of workers.
The machine must be kept clean, and it is strictly forbidden to have oil stains, drug liquid or glass fragments on the machine to prevent machine erosion.
http://www.machinepharmaceutical.com/
